AHEAD OF TIME
Cut apart each decal with a pair of scissors. Holding each sheet of the decals up to the light will help make them more visible. You may want to use one of the small hearts to do a test. It will ease your mind how clean and easy they are to remove.
TO APPLY DECALS
1. Separate the decals from it's paper backing (leaving decal attached to the transfer paper).
2. Carefully place the graphic sticky side down on the vehicle.
3. Squeegee over the surface with the Lil' Chizler tool provided.
4. Starting on the corner of the transfer paper, slowly remove the paper at a sharp angle.
TO REMOVE DECALS
Simply use the Lil' Chizler tool provided to pick a corner of the decal up, then pull the rest up with your fingers. Buff with a soft cloth if necessary.
EASY TO FOLLOW HELPFUL HINTS BELOW:
Using masking tape, apply ( paper and all) to your surface by taping the upper two corners making a hinge. Stand back and make sure it is straight and looks good where you have it. Adjust as necessary.
Flip up the decal, than carefully peel off the backing.
Holding the decal taut, slowly lower it to the surface.
Now squeegee the entire surface.
Peel away the top application tape at a sharp angle. The sharper the angle the less likely that it will pull the decal back up with it.
